LOADING...

HANDHELD SCREWDRIVER

BRAND DISTRIBUTORS

sqpartner-deprag
HANHELD SCREWDRIVERS

DEPRAG handheld screwdrivers are designed to fulfill the highest requirements for the industrial assembly.


ELECTRONIC HANDHELD SCREWDRIVERS

Torque range from 8 Nm (1.14 inch ounces) to 120 Nm (1,160 inch pounds)

Ergonomic  Documentation capable  • Flexible  Versatile   Process reliable

 

MINIMAT-EC-Servo Screwdriver

The EC-Servo Screwdriver with brushless EC-motor offer – together with the corresponding controller AST30-31 – a maximum flexibility and process reliability – even on a manual workstation.

The integrated sensor controlled torque- and angle measurement allows the exact control and regulation of the screw tightening process, as well as the documentation of important process parameters and guarantees the highest precision.

Consequently, several different tightening parameter can be realized with one assembly cycle.

Design execution : Straight

  • Torque range: 0.1 – 2 Nm
  • Torque range: 0.2 – 500 Nm

DOWNLOAD CATALOG D3496

DOWNLOAD CATALOG D3161

Design execution : Angle-head form

  •  Torque range: 7 – 120 Nm   

DOWNLOAD CATALOG D3497

 


MINIMAT-EC Screwdriver

The flexible EC-Screwdriver with brushless EC-motor offer – together with the corresponding controller AST11 – maximal flexibility and process reliability.

The integrated current-controlled torque- and angle measurement allows the exact control and regulation of the screw tightening process as well as the documentation of important process parameters and guarantees the highest precision.

Consequently, several different tightening parameters can be realized with one assembly cycle.

Design execution : Straight

  • Torque range: 0.01 – 25 Nm

Design execution : Pistolgrip

  • Torque range: 0.06 – 18 Nm

Design execution: Angle-head form

  • Torque range: 0.4 – 25 Nm

DOWNLOAD CATALOG D3490


MINIMAT-EC Cordless Screwdriver

Battery operated screwdriving with highest accuracy

The new cordless angle nutrunner is an excellent solution for process control of threaded fastener assemblies under restricted working conditions – without electrical cables or air hoses.

Proven DEPRAG precision screwdriving technology with high torque accuracy.

Design execution : Angle-Head

  • Torque Range: 1 Nm – 50 Nm

Design execution : Pistol form

  • Torque Range: 0.8 – 13 Nm

DOWNLOAD CATALOG D3710


MINIMAT-ED Screwdriver

Digital A/C Electric Screwdriver with electromagnetic shut-off clutch.
The torque adjustment is done comfortably direct on the screwdriver: Just Plug and Play!

This innovative screwdriver is especially well suited for workstations with everchanging tightening parameters. Its use in the controller- and switchboard construction is just as feasible as in an industrial recycling facility, in the mass-production assembly as well as in repair operations.

Design execution : Straight

  • Torque range: 0.24 – 4.8 Nm

DOWNLOAD CATALOG D3495


A/C Electric Screwdriver

The economical A/C Electric Screwdriver with mechanical shut-off clutch.

The alternative solution, when the workstation does not have a supply of compressed air.

Design execution : Straight

  • Torque range: 0.04 – 12 Nm

DOWNLOAD CATALOG D3480


Handheld Electric Screwdriver for Screwfeeders

Nearly every screwdriver of the MICROMAT/MINIMAT series can be combined with our screwfeeders.

Here, we can offer a wide assortment of screwdrivers that are perfectly adapted for our screwfeeders.

Screwdriver versions for a Screwfeeder:

  • MICROMAT-EC Z-execution
  • MINIMAT-EC Z-execution
  • MINIMAT-EC-Servo Z-execution

If so requested, we can supply our screwdrivers in ESD-execution to connect to a screwfeeder.

DOWNLOAD CATALOG D3820


PNEUMATIC HANDHELD SCREWDRIVERS

For nearly all industrial applications

Uninfluenceably acurate   Economical   Robust   Ergonomic   Durable  Quiet

 

NANOMAT

The screwdriver for extremely small torque values of 8 Nmm – 300 Nmm at speeds of 450 to 2,000 rpm.

The ideal solutions for micro assemblies in the medical industry, the watchmaking industry, optical industry, for the production of small consumer electronics and components, and for the use with precision engineering or model making.

The Screwdriver for micro assemblies

  • Design execution: Straight
  • Torque range: from 8 Nmm – 300 Nmm
    for speeds from 300 to 1,400 rpm

DOWNLOAD CATALOG D3415


MICROMAT

The basic solution for nearly all screwdriving tasks of 2 Ncm (3 inch ounces) to 70 Ncm (6.2 inch pounds).

This skinny screwdriver – hardly larger than a ballpoint pen – is designed for the use in a rugged industrial area and this driver series assures extreme high up-times. This special clutch design can reach an extreme high torque accuracy, in many cases below ≤3 % of the standard deviation, which is kept constant over several million of cycles.

MICROMAT Screwdriver

  • Design execution: Straight
  • Torque range: from 2 Ncm – 70 Ncm

DOWNLOAD CATALOG D3420

MICROMAT-ESD Screwdriver

  • Design execution: Straight
  • Torque range: from 2 Ncm – 70 Ncm

DOWNLOAD CATALOG D3421


MINIMAT

The basic solution for nearly all screwdriving tasks of 0.2 Nm to 65 Nm.

This handheld screwdriver is designed for the use in rugged industrial applications and it assures extreme high up-times. This special clutch design enables our screwdrivers to reach extreme high torque accuracy, in many cases below ≤3 % of the standard deviation, which remains constant over several million of cycles.

MINIMAT Screwdriver

  • Design execution: Straight
  • Torque range: 0.2 – 20 Nm

DOWNLOAD CATALOG D3430

  • Design execution: Pistolgrip
  • Torque range: 0.3 – 20 Nm

DOWNLOAD CATALOG D3435

  • Design execution: Angle-Head
  • Torque range: 0.3 – 65 Nm

DOWNLOAD CATALOG D3450

MINIMAT-ESD Screwdriver

DOWNLOAD CATALOG D3421


MICROMAT-F/MINIMAT-F

Pneumatic srewdrivers with additional function control.

If an error occurs, the controller fc20 locks-out the connected screwdriver. The subsequent assembly process can only be started if the previous task was completed properly. The correct number of tightened screws per assembly can also be controlled.

MICROMAT-F Screwdriver

  • Design execution: Straight
  • Torque range: 2 – 70 Ncm

MINIMAT-F Screwdriver

  • Design execution: Straight
  • Torque range: 0.2 – 20 Nm
  • Design execution: Pistolgrip
  • Torque range: 0.3 – 24 Nm
  • Design execution: Angle-head design
  • Torque range: 0.3 – 33 Nm

DOWNLOAD CATALOG D3440


SENSOMAT

Test screwdriver with controlled clutch function for screw-joints with higher seating torque than driving torque.

The special execution for thread-tapping, thread-cutting or self-drilling fasteners! The SENSOMAT screwdriver first tightens the screw at full motor power and engages the shut-off clutch only shortly before the screwhead bottoms out.

SENSOMAT Screwdriver

  • Design execution: Straight
  • Torque range: 0.3 – 5.0 Nm at a maximum driving torque of 7 Nm
  • Design execution: Pistolgrip
  • Torque range: 0.4 – 5 Nm at a maximum driving torque of 7 Nm

DOWNLOAD CATALOG D3460


The pneumatic, handheld Screwdriver for a Screwfeeder

Handheld Screwdrivers for automatic Screwfeeding

Nearly every screwdriver of the MICROMAT/MINIMAT series as well as the ERGOMAT and SENSOMAT series, can be combined with our screwfeeding machines.

Here, we can offer the wide product range of the screwdrivers that are perfectly adapted to our screwfeeders.

Screwdriver versions for a Screwfeeder:

  • MICROMAT Z-execution, straight
  • MINIMAT Z-execution, straight
  • ERGOMAT Z-execution, straight
  • MICROMAT-F Z-execution, straight
  • MINIMAT-F Z-execution, straight
  • SENSOMAT Z-execution, straight

DOWNLOAD CATALOG D3820

Additional screwdriver versions that are suitable for the use with automatic screwfeeders:

  • MINIMAT pistolgrip

DOWNLOAD CATALOG D3435

  • MINIMAT-T straight or pistolgrip

DOWNLOAD CATALOG D3470


The handheld Screwdriver for a Special Applications

Impulse Screwdriver with Automatic Shut-Off

The ergonomic screwdriver with hydraulic impact can be used for example for a fast rundown to a preset torque, without any noticeable torque-reaction.

Impulse Screwdriver with Automatic Shut-Off:

  • Design execution: Straight
    Torque range: 5 – 35 Nm
  • Design execution: Pistolgrip
    Torque range: 4 Nm – 120 Nm

DOWNLOAD CATALOG D3571


IMPACT Screwdriver

The durable impact screwdrivers for the fast assembly of torque values from 300 – 2650 Nm.

MINIMAT-T Screwdriver:

  • Design execution: Straight, Pistolgrip
    Torque range: 5 Nm – 12 Nm

DOWNLOAD CATALOG D3470


VARIOMAT Screwdriver

The all-rounder for the wood industry.

VARIOMAT with shut-off clutch

  • Design execution: Pistolgrip
    Torque range (soft screw-joint): up to 4.5 Nm
    Torque range (hard screw-joint): up to 5 Nm

VARIOMAT with slip clutch

  • Design execution: Pistolgrip
    Torque range: 0.5 Nm – 4.5 Nm

VARIOMAT with adapter

  • Design execution: Pistolgrip
    Torque range: up to 5.7 Nm

VARIOMAT with keyless drill chuck or standard drill chuck

  • Design execution: Pistolgrip
    Torque range: up to 5.7 Nm

DOWNLOAD CATALOG D3520


RECYCLING Screwdriver

The flexible tool for the repair- and recycling operation.
The RECYCLING screwdriver guarantees the easy loosening of screw-connections.

RECYCLING Screwdriver for Horizontal Disassembly:

  • Design execution: Pistolgrip
    Torque range: up to max. 18 Nm

RECYCLING Screwdriver for the Vertical Disassembly:

  • Design execution: Straight
    Torque range: up to max. 10 Nm

DOWNLOAD CATALOG D3530


Flat Head Wrenches

The solution for limited space conditions and screw sizes from M3 to M18.

Flat Head Wrenches

  • Design: closed head
    Torque range: up to max. 48 Nm
    for screw-sizes of M3 (AF5) – M18 (AF27)

DOWNLOAD CATALOG D3550


CONNEXALL CO., LTD

has an excellent and deep understanding about our products as well as customer needs. We therefore only select high quality assembly tools that are well-recognized and widely used.

The benefits our customers will receive

Assemble projects faster and more accurate

Quality products

Reduce energy-associated costs

Eliminate down time

Provided with long-term maintenance service

Connexall’s after-sales service includes

CALL TO DISCUSS YOUR PROJECT

+66-2313-3400